Genuin FS 3 MK 2
Our classic reborn. Now with 10in-25cm woofer and harmonic construction.
After 10 years our Genuin FS 3 needed overhauling: it was missing the new technologies. We wanted to introduce the harmonic constructions, and… our new driver.
The Genuin FS 3 MK 2 now bears much bigger components, we developed extra for it a new 10" - 25cm paper woofer and the compression driver shows as well new membranes and a brand new horn, developed on purposes to match the compression driver behind it and the bigger woofer.
It is faster, it goes deeper, it is even more friendly to all kind of power amplifiers.
The Genuin FS 3 MK 2 now bears much bigger components, we developed extra for it a new 10" - 25cm paper woofer and the compression driver shows as well new membranes and a brand new horn, developed on purposes to match the compression driver behind it and the bigger woofer.
It is faster, it goes deeper, it is even more friendly to all kind of power amplifiers.
Specifications
• High efficiency
• 2-Ways loudspeaker
• Floor ported Bass-Reflex
• Harmonic construction
• 1” Compression Driver with Mylar membrane
• 10” - 25cm Paper-Woofer
• Gold plated tellurium copper terminals
• Bi-wiring- / Bi-amping -terminals
• Switchable impedance linearisation for the crossover frequency
• Flat impedance curve
• Tube Friendly
• Time alignment to the listening spot
• 5 years Warranty
• 2-Ways loudspeaker
Cabinet
• Floor ported Bass-Reflex
• Harmonic construction
Components
• 1” Compression Driver with Mylar membrane
• 10” - 25cm Paper-Woofer
• Gold plated tellurium copper terminals
Features
• Bi-wiring- / Bi-amping -terminals
• Switchable impedance linearisation for the crossover frequency
• Flat impedance curve
• Tube Friendly
• Time alignment to the listening spot
• 5 years Warranty
Technical Data
| Genuin FS 1 MK 3 | Genuin FS 2 MK 2 | Genuin FS 3 MK 2 | ||
|---|---|---|---|---|
| MaterialMaterialMateriale | Birch plywoodBirke MultiplexMultistrato di betulla | Birch plywoodBirke MultiplexMultistrato di betulla | Birch plywoodBirke MultiplexMultistrato di betulla | |
| ThicknessMaterialdickeSpessore | 18mm / 0,75" | 18mm / 0,75" | 18mm / 0,75" | |
| Internal BracingVerstrebungIrrigidimento | Structural bracing interactionStrukturelle interaktionInterazione strutturale | Structural bracing interactionStrukturelle interaktionInterazione strutturale | Structural bracing interactionStrukturelle interaktionInterazione strutturale | |
| Cross over chamberKammer für FrequenzweicheVolume separato per filtro | No | No | No | |
| Frequency rangeFrequenzgangRisposta in frequenza | 35Hz - 20kHz ± 2dB | 36Hz - 20kHz ± 2dB | 40Hz - 20kHz ± 2dB | |
| Bass CabinetBass GehäuseCabinet dei bassi | Harmonic Bass Reflex | Harmonic Bass Reflex | Harmonic Bass Reflex | |
| PortingBass ReflexCanale | FloorZum BodenA pavimento | FloorZum BodenA pavimento | FloorZum BodenA pavimento | |
| WooferTiefmitteltönerWoofer | 380mm / 16" | 300mm / 12" | 250mm / 10" | |
| MaterialMaterialMateriale | air-dried PaperLuftgetrochnetes PapierCarta asciugata in aria | PaperPapierCarta | Paper P2F® SandwichPapier P2F® SandwichCarta Sandwich P2F® | |
| MagnetMagnetMagnete | AlNiCo | AlNiCo | Ferrit | |
| Cross over frequencyÜbergangsfrequenzFrequenza di taglio | 850 Hz | 1150 Hz | 1200 Hz | |
| MidhighMittelhochtönerMedioalti | Compression driverKompressionstreiberDriver a compressione | Compression driverKompressionstreiberDriver a compressione | Compression driverKompressionstreiberDriver a compressione | |
| Horn ThroatHornDiametro tromba | 1,4" | 1,4" | 1" | |
| Membrane dimensionsMembranendimensionDimensione Membrana | 75mm / 3" | 75mm / 3" | 44mm / 1,75" | |
| MaterialMaterialMateriale | TitaniumTitanTitanio | TitaniumTitanTitanio | Mylar | |
| Max power inputBelastbarkeitPotenza massima (RMS) | 150 W RMS | 150 W RMS | 150 W RMS | |
| EfficiencyWirkungsgradEfficienza | 96 dB | 94 dB | 92 dB | |
| ImpedanceImpedanzImpedenza | 8 Ohm | 8 Ohm | 8 Ohm | |
| Impedance linearizationImpedanzlinearisierungLinearizzazione d'impedenza | YesJaSi | YesJaSi | YesJaSi | |
| TerminalAnschlussfeldTerminali | Bi-Amping | Bi-Amping | Bi-Amping | |
| MaterialMaterialMateriale | Gold plated tellurium copperVergoldetes tellurium KupferRame tellurio placcato oro | Gold plated tellurium copperVergoldetes tellurium KupferRame tellurio placcato oro | Gold plated tellurium copperVergoldetes tellurium KupferRame tellurio placcato oro | |
| FeetsFüßePiedi | Adjustable SpykesRegelbare SpykesSpykes regolabili | Adjustable SpykesRegelbare SpykesSpykes regolabili | Adjustable SpykesRegelbare SpykesSpykes regolabili | |
| DimensionsMaßenDimensioni | 1160 x 450 x 620 mm 45,75 x 17,75 x 24,35 in | 1112 x 332 x 455 mm 43,75 x 13 x 18 in | 990 x 300 x 355 mm 39 x 11,75 x 14 in | |
| WeightGewichtPeso | 60 kg | 45 kg | 25 kg | |
| Packaging dimensionsVerpackungsmaßenDimensioni imballate | 130 x 60 x 38 cm | 120 x 45 x 40 | ||
| Loudspeakers per cartonLautsprecher per KartonPezzi pro cartone | 1 | 1 | 1 | |
| Packaging weightVerpackungsgewichtPeso imballate | 70 kg | 55 kg | 30 kg | |
| Center LoudspeakersCenter LautsprecherDiffusori centrali: | Genuin CS 2 - Twin | Genuin CS 2 - Twin | Center 25 | |
| Center 25 | Center 25 | Center 20 | ||
| Center 20 | Center 17 | |||
Note:
In our workshop we can offer true-wood veneers.
Wood is a natural product and depending on several factors might have different color and structure. Color and structure variations of the surface are not to be considered flaws.
Wood is a natural product and depending on several factors might have different color and structure. Color and structure variations of the surface are not to be considered flaws.
News about the Genuin FS 3 MK 2
Eyearshow - Korea
Friday, Oct 28 2016, %RGenuin FS 1, HiFi Show, Korea
It was the first event held by SI-Works in Korea and the setup was really impressive: playing just analogue on a Kronos turntable. Louis Desjardins was there himself to promote the turntables and help with the setup.
At the beginning of the show we cooperate from remote (communication over Facebook) in supporting the setup and that has been an amazing experience to get the feedback of Louis after making the suggested changes: he said that the sound became delicious and was so enthusiastic that tried to establish a connection with a greek tube amp manufacturer. I appreciated it! And it will have a good follow up.
This was the setup:
- Genuin FS 1 MK 2
- Thöress Audio Mono Amplifiers
- Thöress Audio Pre-Amplifiers
- Thöress Audio Phono Preamp
- Sutherland Engineering Phono Pre-Amplifiers
- Kronos Audio Sparta and Pro Turntables
If You are curious about the pictures of the event, just click here
Dimensions
