Genuin FS 1 MK 3
Costruzione armonica nobilitata con un emozionante woofer da 38cm con membrana asciugata ad aria e di sviluppo proprio.
Quando lo sviluppo del nostro woofer da 16" si è concluso, abbiamo anche fatto l'aggiornamento della Genuin FS 1 alla revisione MK 3. L'aspetto e la struttura sono essenzialmente gli stessi. I cambiamenti sono al suo interno. La nuova membrana asciugata ad aria mossa dal potente magnete in AlNiCo portano il livello del medio-basso di questo diffusore ad un nuovo e più alto livello di qualità. Più basso, più profondità e più ricchezza nei medi.
Specifiche tecniche
• Alta efficienza
• Diffusore a 2 vie
• Bass reflex a pavimento
• Costruzione armonica
• Driver a compressione da 1,4 pollici con membrana in titanio
• Woofer in carta da 16” asciugato ad aria
• potente magnete in AlNiCo
• Connettori in rame tellurio placcato oro
• 2 livelli di riduzione di 1dB di volume della tromba
• predisposizione per Bi-Wiring e Bi-Amping
• linearizzazione d’impedenza per il punto di cross over
• Curva d'impedenza piatta
• Ideale per valvole
• Allineamento temporale dei medioalti sui bassi
• 5 anni di garanzia
• Diffusore a 2 vie
Cabinet
• Bass reflex a pavimento
• Costruzione armonica
Componenti
• Driver a compressione da 1,4 pollici con membrana in titanio
• Woofer in carta da 16” asciugato ad aria
• potente magnete in AlNiCo
• Connettori in rame tellurio placcato oro
Proprietà
• 2 livelli di riduzione di 1dB di volume della tromba
• predisposizione per Bi-Wiring e Bi-Amping
• linearizzazione d’impedenza per il punto di cross over
• Curva d'impedenza piatta
• Ideale per valvole
• Allineamento temporale dei medioalti sui bassi
• 5 anni di garanzia
Dati Tecnici
| Genuin FS 1 MK 3 | Genuin FS 2 MK 2 | Genuin FS 3 MK 2 | ||
|---|---|---|---|---|
| MaterialMaterialMateriale | Birch plywoodBirke MultiplexMultistrato di betulla | Birch plywoodBirke MultiplexMultistrato di betulla | Birch plywoodBirke MultiplexMultistrato di betulla | |
| ThicknessMaterialdickeSpessore | 18mm / 0,75" | 18mm / 0,75" | 18mm / 0,75" | |
| Internal BracingVerstrebungIrrigidimento | Structural bracing interactionStrukturelle interaktionInterazione strutturale | Structural bracing interactionStrukturelle interaktionInterazione strutturale | Structural bracing interactionStrukturelle interaktionInterazione strutturale | |
| Cross over chamberKammer für FrequenzweicheVolume separato per filtro | No | No | No | |
| Frequency rangeFrequenzgangRisposta in frequenza | 35Hz - 20kHz ± 2dB | 36Hz - 20kHz ± 2dB | 40Hz - 20kHz ± 2dB | |
| Bass CabinetBass GehäuseCabinet dei bassi | Harmonic Bass Reflex | Harmonic Bass Reflex | Harmonic Bass Reflex | |
| PortingBass ReflexCanale | FloorZum BodenA pavimento | FloorZum BodenA pavimento | FloorZum BodenA pavimento | |
| WooferTiefmitteltönerWoofer | 380mm / 16" | 300mm / 12" | 250mm / 10" | |
| MaterialMaterialMateriale | air-dried PaperLuftgetrochnetes PapierCarta asciugata in aria | PaperPapierCarta | Paper P2F® SandwichPapier P2F® SandwichCarta Sandwich P2F® | |
| MagnetMagnetMagnete | AlNiCo | AlNiCo | Ferrit | |
| Cross over frequencyÜbergangsfrequenzFrequenza di taglio | 850 Hz | 1150 Hz | 1200 Hz | |
| MidhighMittelhochtönerMedioalti | Compression driverKompressionstreiberDriver a compressione | Compression driverKompressionstreiberDriver a compressione | Compression driverKompressionstreiberDriver a compressione | |
| Horn ThroatHornDiametro tromba | 1,4" | 1,4" | 1" | |
| Membrane dimensionsMembranendimensionDimensione Membrana | 75mm / 3" | 75mm / 3" | 44mm / 1,75" | |
| MaterialMaterialMateriale | TitaniumTitanTitanio | TitaniumTitanTitanio | Mylar | |
| Max power inputBelastbarkeitPotenza massima (RMS) | 150 W RMS | 150 W RMS | 150 W RMS | |
| EfficiencyWirkungsgradEfficienza | 96 dB | 94 dB | 92 dB | |
| ImpedanceImpedanzImpedenza | 8 Ohm | 8 Ohm | 8 Ohm | |
| Impedance linearizationImpedanzlinearisierungLinearizzazione d'impedenza | YesJaSi | YesJaSi | YesJaSi | |
| TerminalAnschlussfeldTerminali | Bi-Amping | Bi-Amping | Bi-Amping | |
| MaterialMaterialMateriale | Gold plated tellurium copperVergoldetes tellurium KupferRame tellurio placcato oro | Gold plated tellurium copperVergoldetes tellurium KupferRame tellurio placcato oro | Gold plated tellurium copperVergoldetes tellurium KupferRame tellurio placcato oro | |
| FeetsFüßePiedi | Adjustable SpykesRegelbare SpykesSpykes regolabili | Adjustable SpykesRegelbare SpykesSpykes regolabili | Adjustable SpykesRegelbare SpykesSpykes regolabili | |
| DimensionsMaßenDimensioni | 1160 x 450 x 620 mm 45,75 x 17,75 x 24,35 in | 1112 x 332 x 455 mm 43,75 x 13 x 18 in | 990 x 300 x 355 mm 39 x 11,75 x 14 in | |
| WeightGewichtPeso | 60 kg | 45 kg | 25 kg | |
| Packaging dimensionsVerpackungsmaßenDimensioni imballate | 130 x 60 x 38 cm | 120 x 45 x 40 | ||
| Loudspeakers per cartonLautsprecher per KartonPezzi pro cartone | 1 | 1 | 1 | |
| Packaging weightVerpackungsgewichtPeso imballate | 70 kg | 55 kg | 30 kg | |
| Center LoudspeakersCenter LautsprecherDiffusori centrali: | Genuin CS 2 - Twin | Genuin CS 2 - Twin | Center 25 | |
| Center 25 | Center 25 | Center 20 | ||
| Center 20 | Center 17 | |||
Nota:
Nella nostra falegnameria possiamo produrre qualunque tipo di finitura superficiale in nobilitato di autentico legno.
Il legno è un prodotto naturale ed il suo colore e la struttura delle sue venature dipendono da tanti fattori e dalle zone di crescita. Quindi variazioni ed irregolarità della superficie non sono da considerarsi difetti ai fini di un reclamo.
Il legno è un prodotto naturale ed il suo colore e la struttura delle sue venature dipendono da tanti fattori e dalle zone di crescita. Quindi variazioni ed irregolarità della superficie non sono da considerarsi difetti ai fini di un reclamo.
Novità sulla Genuin FS 1
Klangschloss Greifensee
Saturday, Apr 14 2018, %RGenuin FS 1, HiFi Show, Switzerland |
| Blumenhofer's Setup at the Klangschloss.ch 2018 |
Our Swiss distributor, Soundrevolution.ch participated to the Klangschloss in Greifensee, near Zürich.
At this show we shared the big room with another company, Illusonic. This made the whole thing very relaxing: half an hour to present the system with the music, half an hour to discuss with customers outside... or drinking a cup of caffe...
Public was at a very high musical level, presentations were amazing, location was gorgeous… and we had a beautiful weather ;-)
At this show we shared the big room with another company, Illusonic. This made the whole thing very relaxing: half an hour to present the system with the music, half an hour to discuss with customers outside... or drinking a cup of caffe...
Public was at a very high musical level, presentations were amazing, location was gorgeous… and we had a beautiful weather ;-)
The setup was composed by:
- Merging Nadac 8 channel DAC-Preamplifier with external power supply
- Gato Audio CD Player
- Gato Audio Mono Power Amplfiiers
- Whole cabling by Cammino
- Decouplers from Omicron
- Loudspeakers Genuin FS 1 MK 2 from Blumenhofer
- Rack studied and developed by us in Attalens
From the pictures in the gallery of Soundrevolution (here) You can have more information about the components and how they have been connected in our setup
We only had digital music, played with a Roon-based control. It was the first time since longer time that browsing the titles on the iPad gave a certain analogue feeling. I will investigate Roon as soon as I'll be back from the Munich High End Show 2018.
One (or rather 4) important appointments during the show were the 4 lectures from specialists. They invited me to be one of these lecturer and I used the opportunity to tell some stories about horn and our understanding of horns. Here You can download it and get a short feeling, of what I presented to the public. Honestly I was expecting optimistically 8-10 persons in the public. No. The room was full. More than 40 people were there listening to what I intended to tell them. Challenging has been the Q&A session after the lecture.
We all enjoyed the show at the Klangschloss and the great engagement of Marcus to have a great show in the amazing avenue. Looking forward for the Klangschloss 2019.
In the meantime You can enjoy here some pictures of the 2018 event, in the web pages of Soundrevolution
Milano HiFi presentation of the Genuin FS 1 MK 2
Saturday, Apr 22 2017, %RGenuin FS 1, Genuin FS 3, HiFi Show, Italy
Our Milan dealer, Enea Spinelli from Spinelli HiFi, participated to the Milano Hi-Fidelity show this year. An event from the Sound of the Valve by Stefano Zaini, this event presents HiFi in Milano since more than 16 years.
It has been an amazing weekend with some very good music and food. I enjoyed the chance as well to test some of the music for the Munich High End.
No big news in the setup but for the new racks of Solidsteel and feet of Omicron. Nothing very mind blowing, but a lot of small things to increase the level of the presentation.
Octave and Marantz electronics, Transrotor and Rega sources, Cammino cabling and power treatment. Blumenhofer loudspeakers.
If You wich to see more pictures You can enjoy them here.
Blumenhofer at Sambs HiFi
Friday, Mar 24 2017, %RAustria, Event, Genuin FS 1
At Sambs HiFi in Linz, Walter Kircher presented our Genuin FS 1 MK 2 on a McIntosh chain… the week before that same chain powered another brand of loudspeakers… a good chance for a comparison ;-)
Here You can enjoy more pictures.
Dimensioni
