Genuin FS 1 MK 3

Harmonische Konstruktion und einen eigenen Blumenhofer luftgetrockneten 38 cm Tieftöner.

Als die Entwicklung unseres 16" Tieftöner abgeschlossen wurde, haben wir auch unsere Genuin FS 1 zum MK 3 gebracht. Aussehen und Struktur sind grundsätzlich die gleiche. Die Änderungen sind drinnen. Die neue luftgetrocknete Papier-Membrane wird von einem sehr starkem AlNiCo Magnet bewegt. Das rüstet den Tief-Mitteltonbereich unserer Genuin FS 1 MK 3 zu einem neuen Qualitätsniveau. Mehr Tiefe, mehr Bass, mehr Reichtum in Mitteltonbereit.

Spezifikationen

• Hohes Wirkungsgrad
• 2-Wege Lautsprecher

Gehäuse


• Zum Boden gerichtete Bass Reflex Abstimmung
• Harmonische Konstruktion

Komponenten


• 1,4” Kompressionstreiber mit Titanmembran
• 16” luftgetrocknete Papier-Tieftöner
• Sehr starker AlNiCo Magnet
• Vergoldete Tellurium Kupfer Anschlüsse

Eigenschaften


• 2-stufige Hochtonpegelabsenkung in 1dB-Schritten
• Bi-wiring- / Bi-amping - Anschlüsse
• Schaltbare Impedanz-Linearisierung
• Flache Impedanzkurve
• Rörenfreundlich
• 10 Jahre Garantie

Technische Daten

Genuin FS 1 MK 3Genuin FS 2 MK 2Genuin FS 3 MK 2
MaterialMaterialMaterialeBirch plywoodBirke MultiplexMultistrato di betullaBirch plywoodBirke MultiplexMultistrato di betullaBirch plywoodBirke MultiplexMultistrato di betulla
ThicknessMaterialdickeSpessore18mm / 0,75"18mm / 0,75"18mm / 0,75"
Internal BracingVerstrebungIrrigidimentoStructural bracing interactionStrukturelle interaktionInterazione strutturaleStructural bracing interactionStrukturelle interaktionInterazione strutturaleStructural bracing interactionStrukturelle interaktionInterazione strutturale
Cross over chamberKammer für FrequenzweicheVolume separato per filtroNoNoNo
Frequency rangeFrequenzgangRisposta in frequenza35Hz - 20kHz ± 2dB36Hz - 20kHz ± 2dB40Hz - 20kHz ± 2dB
Bass CabinetBass GehäuseCabinet dei bassiHarmonic
Bass Reflex
Harmonic
Bass Reflex
Harmonic
Bass Reflex
PortingBass ReflexCanaleFloorZum BodenA pavimentoFloorZum BodenA pavimentoFloorZum BodenA pavimento
WooferTiefmitteltönerWoofer380mm / 16"300mm / 12"250mm / 10"
MaterialMaterialMaterialeair-dried PaperLuftgetrochnetes PapierCarta asciugata in ariaPaperPapierCartaPaper
P2F® Sandwich
Papier
P2F® Sandwich
Carta
Sandwich P2F®
MagnetMagnetMagneteAlNiCoAlNiCoFerrit
Cross over frequencyÜbergangsfrequenzFrequenza di taglio850 Hz1150 Hz1200 Hz
MidhighMittelhochtönerMedioaltiCompression driverKompressionstreiberDriver a compressioneCompression driverKompressionstreiberDriver a compressioneCompression driverKompressionstreiberDriver a compressione
Horn ThroatHornDiametro tromba1,4"1,4"1"
Membrane dimensionsMembranendimensionDimensione Membrana75mm / 3"75mm / 3"44mm / 1,75"
MaterialMaterialMateriale TitaniumTitanTitanio TitaniumTitanTitanioMylar
Max power inputBelastbarkeitPotenza massima (RMS)150 W RMS150 W RMS150 W RMS
EfficiencyWirkungsgradEfficienza96 dB94 dB92 dB
ImpedanceImpedanzImpedenza8 Ohm8 Ohm8 Ohm
Impedance linearizationImpedanzlinearisierungLinearizzazione d'impedenzaYesJaSiYesJaSiYesJaSi
TerminalAnschlussfeldTerminaliBi-AmpingBi-AmpingBi-Amping
MaterialMaterialMaterialeGold plated
tellurium copper
Vergoldetes tellurium KupferRame tellurio placcato oro
Gold plated
tellurium copper
Vergoldetes tellurium KupferRame tellurio placcato oro
Gold plated
tellurium copper
Vergoldetes tellurium KupferRame tellurio placcato oro
FeetsFüßePiediAdjustable SpykesRegelbare SpykesSpykes regolabiliAdjustable SpykesRegelbare SpykesSpykes regolabiliAdjustable SpykesRegelbare SpykesSpykes regolabili
DimensionsMaßenDimensioni1160 x 450 x 620 mm
45,75 x 17,75 x 24,35 in
1112 x 332 x 455 mm
43,75 x 13 x 18 in
990 x 300 x 355 mm
39 x 11,75 x 14 in
WeightGewichtPeso60 kg45 kg25 kg
Packaging dimensionsVerpackungsmaßenDimensioni imballate130 x 60 x 38 cm120 x 45 x 40
Loudspeakers per cartonLautsprecher per KartonPezzi pro cartone111
Packaging weightVerpackungsgewichtPeso imballate70 kg55 kg30 kg
Center LoudspeakersCenter LautsprecherDiffusori centrali:Genuin CS 2 - TwinGenuin CS 2 - TwinCenter 25
Center 25Center 25Center 20
Center 20Center 17

Anmerkung:

Unsere hauseigene Schreinerei ermöglicht uns Echtholzfurniere perfekt zu verarbeiten.
Holz ist ein Naturprodukt und kann durch Herkunft, Wuchs, Dichte und Lagerung unterschiedliche Farbtöne, Maserungen und Strukturen aufweisen. Unterschiede in
Farbgebung und Struktur sind daher kein Reklamationsgrund. Änderungen an Holzarten und Oberflächen behalten wir uns vor.

Neuheiten um die Genuin FS 1

The first batch of series woofers have arrived


The first batch of new Blumenhofer woofers has been delivered yesterday. Looking forward to deliver You, the necessary tools for Your next time.

We actually had already some pre-series woofer in house that allowed us to deliver the first customers. And this delivery was expected already long ago. But... delayed due to Coronavirus.

The first BHA-16" woofer from small series production


Finally we are getting there again. After 2 years development and several iterations, the new 16" woofer entirely born on our experience and research. Air dried paper membrane. 8Ω and 16Ω for several projects. 2 versions, one for subwoofer application one for stereo application. We will soon be able to restart the production of the Genuin FS 1, which will become MK 3, because there are very big changes connected to the woofer.

Klangschloss Greifensee

Blumenhofer's Setup at the Klangschloss.ch 2018

Our Swiss distributor, Soundrevolution.ch participated to the Klangschloss in Greifensee, near Zürich.

At this show we shared the big room with another company, Illusonic. This made the whole thing very relaxing: half an hour to present the system with the music, half an hour to discuss with customers outside... or drinking a cup of caffe...

Public was at a very high musical level, presentations were amazing, location was gorgeous… and we had a beautiful weather ;-)

The setup was composed by:
- Merging Nadac 8 channel DAC-Preamplifier with external power supply
- Gato Audio CD Player
- Gato Audio Mono Power Amplfiiers
- Whole cabling by Cammino
- Decouplers from Omicron
- Loudspeakers Genuin FS 1 MK 2 from Blumenhofer
- Rack studied and developed by us in Attalens
From the pictures in the gallery of Soundrevolution (here) You can have more information about the components and how they have been connected in our setup

We only had digital music, played with a Roon-based control. It was the first time since longer time that browsing the titles on the iPad gave a certain analogue feeling. I will investigate Roon as soon as I'll be back from the Munich High End Show 2018.
One (or rather 4) important appointments during the show were the 4 lectures from specialists. They invited me to be one of these lecturer and I used the opportunity to tell some stories about horn and our understanding of horns. Here You can download it and get a short feeling, of what I presented to the public. Honestly I was expecting optimistically 8-10 persons in the public. No. The room was full. More than 40 people were there listening to what I intended to tell them. Challenging has been the Q&A session after the lecture.

We all enjoyed the show at the Klangschloss and the great engagement of Marcus to have a great show in the amazing avenue. Looking forward for the Klangschloss 2019.
In the meantime You can enjoy here some pictures of the 2018 event, in the web pages of Soundrevolution

Abmessungen

Dimensions of the Genuin FS 1 MK 2

Bildergalerie